小鸟酱视频资源福利

Product

Product

未標題-4.jpg 


JUXIN-80

Pump size:DN80 Flange,Max flow:9600 l/h


standard:7.5kw Variable frequency motor


Suction ability up to 9.5   meters and self-priming
Dry-run   without damage
For   high viscosity or shear sensitive medium
No   leaking, no block. No sealing gasket, ball, diaphragm, immersion rotor,   stator and piston etc.
Pumping   abrasive slurries, corrosive acids, large solids       and gas-liquid mixture.
No   internal leakage. Flow stability, can accurate and repeatable measurement.   Accuracy ±1%
No   ancillary equipment, check valves or water flush systems
Reversing   operation, particle can safety out from suction or discharge pipe
◆Minimal   maintenance-just change the hose
◆Reliable quality, low using cost


Flow  rate measured with water of 20℃, out   pressure show as following chart

jx80參數.jpg


Product   information

Inlet/outlet

DN80 FLANGE


Motor power

7.5KW


Max flow

11.5 l/min


Max head

160m


Max discharge pressure

16 Bar


Lubricant required

35 L


Max temperature

80


Hose options

Chlorosulfonated polyethylene rubber(CSM) Natural   rubber(NR)
  foodgrade hose(F NBR)  nitrile   rubber(NBR)  EPDM


Installation   size (mm)

40尺寸圖.jpg80參數.jpg